We had an extra layer of indirection in looking up hashes and sigs based
on sigalgs which is now no longer necessary. This removes it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
In TLSv1.2 an individual sig alg is represented by 1 byte for the hash
and 1 byte for the signature. In TLSv1.3 each sig alg is represented by
two bytes, where the two bytes together represent a single hash and
signature combination. This converts the internal representation of sigalgs
to use a single int for the pair, rather than a pair of bytes.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2157)
This variable represents the index of the cert within the chain, so give it
a name that better represents that.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2020)
We remove the separate CertificateStatus message for TLSv1.3, and instead
send back the response in the appropriate Certificate message extension.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2020)
Also updates TLSProxy to be able to understand the format and parse the
contained extensions.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2020)
Continuing from the previous commit we also need to extend the extensions
framework to supply the Certificate we just read during parsing.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2020)
The Certificate message in TLS1.3 has an extensions block for each
Certificate. Therefore we need to extend tls_construct_extensions() to pass
in the certificate we are working on. We also pass in the position in the
chain (with 0 being the first certificate).
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2020)
Previously we were omitting the extension information from ext_defs if
the association no- option was defined. This doesn't work because the
indexes into the table are no longer valid.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2153)
This should be sent in the ServerHello if a EC based ciphersuite is
negotiated. The relevant flag to do this was missed off in the recent
extensions refactor.
Fixes GitHub Issue #2133
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2153)
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Travis was indicating a bogus uninit var warning. This fixes it.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Various functions got renamed. We need to rename the error codes too.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The existing code used the magic number -1 to represent the absence of
a status_type in the extension. This commit replaces it with a macro.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
When we call tls_collect_extensions() we need to free up the raw
extensions data later.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
In TLS1.3 some ServerHello extensions remain in the ServerHello, while
others move to the EncryptedExtensions message. This commit performs that
move.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Because extensions were keyed by type which is sparse, we were continually
scanning the list to find the one we wanted. The way we stored them also
had the side effect that we were running initialisers/finalisers in a
different oder to the parsers. In this commit we change things so that we
instead key on an index value for each extension.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove some functions that are no longer needed now that we have the new
extension framework.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The _clienthello_ in the extensions parsing functions is overly specific.
Better to keep the convention to just _client_
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
This lays the foundation for a later move to have the extensions built and
placed into the correct message for TLSv1.3 (e.g. ServerHello or
EncryptedExtensions).
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Later we will have client extensions code too.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add support for construction of extensions
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
This builds on the work started in 1ab3836b3 and extends is so that
each extension has its own identified parsing functions, as well as an
allowed context identifying which messages and protocols it is relevant for.
Subsequent commits will do a similar job for the ServerHello extensions.
This will enable us to have common functions for processing extension blocks
no matter which of the multiple messages they are received from. In TLSv1.3
a number of different messages have extension blocks, and some extensions
have moved from one message to another when compared to TLSv1.2.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Subsequent commits will pull other extensions code into this file.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
At this stage the message is just empty. We need to fill it in with
extension data.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
There are some minor differences in the format of a ServerHello in TLSv1.3.
Perl changes reviewed by Richard Levitte. Non-perl changes reviewed by Rich
Salz
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
There is a set of miscellaneous processing for OCSP, CT etc at the end of
the ServerDone processing. In TLS1.3 we don't have a ServerDone, so this
needs to move elsewhere.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This is a major overhaul of the TLSv1.3 state machine. Currently it still
looks like TLSv1.2. This commit changes things around so that it starts
to look a bit less like TLSv1.2 and bit more like TLSv1.3.
After this commit we have:
ClientHello
+ key_share ---->
ServerHello
+key_share
{CertificateRequest*}
{Certificate*}
{CertificateStatus*}
<---- {Finished}
{Certificate*}
{CertificateVerify*}
{Finished} ---->
[ApplicationData] <---> [Application Data]
Key differences between this intermediate position and the final TLSv1.3
position are:
- No EncryptedExtensions message yet
- No server side CertificateVerify message yet
- CertificateStatus still exists as a separate message
- A number of the messages are still in the TLSv1.2 format
- Still running on the TLSv1.2 record layer
Reviewed-by: Rich Salz <rsalz@openssl.org>
TLSv1.3 has a NewSessionTicket message, but it is *completely* different to
the TLSv1.2 one and may as well have been called something else. This commit
removes the old style NewSessionTicket from TLSv1.3. We will have to add the
new style one back in later.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The previous commits put in place the logic to exchange key_share data. We
now need to do something with that information. In <= TLSv1.2 the equivalent
of the key_share extension is the ServerKeyExchange and ClientKeyExchange
messages. With key_share those two messages are no longer necessary.
The commit removes the SKE and CKE messages from the TLSv1.3 state machine.
TLSv1.3 is completely different to TLSv1.2 in the messages that it sends
and the transitions that are allowed. Therefore, rather than extend the
existing <=TLS1.2 state transition functions, we create a whole new set for
TLSv1.3. Intially these are still based on the TLSv1.2 ones, but over time
they will be amended.
The new TLSv1.3 transitions remove SKE and CKE completely. There's also some
cleanup for some stuff which is not relevant to TLSv1.3 and is easy to
remove, e.g. the DTLS support (we're not doing DTLSv1.3 yet) and NPN.
I also disable EXTMS for TLSv1.3. Using it was causing some added
complexity, so rather than fix it I removed it, since eventually it will not
be needed anyway.
Reviewed-by: Rich Salz <rsalz@openssl.org>
At the moment the server doesn't yet do anything with this information.
We still need to send the server's key_share info back to the client. That
will happen in subsequent commits.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This is a skin deep change, which simply renames most places where we talk
about curves in a TLS context to groups. This is because TLS1.3 has renamed
the extension, and it can now include DH groups too. We still only support
curves, but this rename should pave the way for a future extension for DH
groups.
Reviewed-by: Rich Salz <rsalz@openssl.org>
We can end up with a NULL SSL_METHOD function if a method has been
disabled. If that happens then we shouldn't call vent->smeth().
Reviewed-by: Rich Salz <rsalz@openssl.org>
The size if fixed by the protocol and won't change even if
sizeof(clienthello.random) does.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add a blank line, take one away - due to feedback received during review.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
We should be freeing up the raw extension data after we've finished with it.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
In the case of an SSLv2 compat ClientHello we weren't setting up the
compression methods correctly, which could lead to uninit reads or crashes.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
This partially reverts commit c636c1c47. It also tweaks the documentation
and comments in this area. On the client side the documented interface for
SSL_CTX_set_verify()/SSL_set_verify() is that setting the flag
SSL_VERIFY_PEER causes verfication of the server certificate to take place.
Previously what was implemented was that if *any* flag was set then
verification would take place. The above commit improved the semantics to
be as per the documented interface.
However, we have had a report of at least one application where an
application was incorrectly using the interface and used *only*
SSL_VERIFY_FAIL_IF_NO_PEER_CERT on the client side. In OpenSSL prior to
the above commit this still caused verification of the server certificate
to take place. After this commit the application silently failed to verify
the server certificate.
Ideally SSL_CTX_set_verify()/SSL_set_verify() could be modified to indicate
if invalid flags were being used. However these are void functions!
The simplest short term solution is to revert to the previous behaviour
which at least means we "fail closed" rather than "fail open".
Thanks to Cory Benfield for reporting this issue.
Reviewed-by: Richard Levitte <levitte@openssl.org>
We read it later in grow_init_buf(). If CCS is the first thing received in
a flight, then it will use the init_msg from the last flight we received. If
the init_buf has been grown in the meantime then it will point to some
arbitrary other memory location. This is likely to result in grow_init_buf()
attempting to grow to some excessively large amount which is likely to
fail. In practice this should never happen because the only time we receive
a CCS as the first thing in a flight is in an abbreviated handshake. None
of the preceding messages from the server flight would be large enough to
trigger this.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Travis is reporting one file at a time shadowed variable warnings where
"read" has been used. This attempts to go through all of libssl and replace
"read" with "readbytes" to fix all the problems in one go.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Includes addition of the various options to s_server/s_client. Also adds
one of the new TLS1.3 ciphersuites.
This isn't "real" TLS1.3!! It's identical to TLS1.2 apart from the protocol
and the ciphersuite...and the ciphersuite is just a renamed TLS1.2 one (not
a "real" TLS1.3 ciphersuite).
Reviewed-by: Rich Salz <rsalz@openssl.org>
We now set the handshake header, and close the packet directly in the
write_state_machine. This is now possible because it is common for all
messages.
Reviewed-by: Rich Salz <rsalz@openssl.org>
tls_construct_finished() used to have different arguments to all of the
other construction functions. It doesn't anymore, so there is no neeed to
treat it as a special case.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Ensure all message types work the same way including CCS so that the state
machine doesn't need to know about special cases. Put all the special logic
into ssl_set_handshake_header() and ssl_close_construct_packet().
Reviewed-by: Rich Salz <rsalz@openssl.org>
Instead of initialising, finishing and cleaning up the WPACKET in every
message construction function, we should do it once in
write_state_machine().
Reviewed-by: Rich Salz <rsalz@openssl.org>
ssl_set_handshake_header2() was only ever a temporary name while we had
to have ssl_set_handshake_header() for code that hadn't been converted to
WPACKET yet. No code remains that needed that so we can rename it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
In plain PSK we don't need to do anymore construction after the preamble.
We weren't detecting this case and treating it as an unknown cipher.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The buffer to receive messages is initialised to 16k. If a message is
received that is larger than that then the buffer is "realloc'd". This can
cause the location of the underlying buffer to change. Anything that is
referring to the old location will be referring to free'd data. In the
recent commit c1ef7c97 (master) and 4b390b6c (1.1.0) the point in the code
where the message buffer is grown was changed. However s->init_msg was not
updated to point at the new location.
CVE-2016-6309
Reviewed-by: Emilia Käsper <emilia@openssl.org>
We actually construct a HelloVerifyRequest in two places with common code
pulled into a single function. This one commit handles both places.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Russian GOST ciphersuites are vulnerable to the KCI attack because they use
long-term keys to establish the connection when ssl client authorization is
on. This change brings the GOST implementation into line with the latest
specs in order to avoid the attack. It should not break backwards
compatibility.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
This issue is very similar to CVE-2016-6307 described in the previous
commit. The underlying defect is different but the security analysis and
impacts are the same except that it impacts DTLS.
A DTLS message includes 3 bytes for its length in the header for the
message.
This would allow for messages up to 16Mb in length. Messages of this length
are excessive and OpenSSL includes a check to ensure that a peer is sending
reasonably sized messages in order to avoid too much memory being consumed
to service a connection. A flaw in the logic of version 1.1.0 means that
memory for the message is allocated too early, prior to the excessive
message length check. Due to way memory is allocated in OpenSSL this could
mean an attacker could force up to 21Mb to be allocated to service a
connection. This could lead to a Denial of Service through memory
exhaustion. However, the excessive message length check still takes place,
and this would cause the connection to immediately fail. Assuming that the
application calls SSL_free() on the failed conneciton in a timely manner
then the 21Mb of allocated memory will then be immediately freed again.
Therefore the excessive memory allocation will be transitory in nature.
This then means that there is only a security impact if:
1) The application does not call SSL_free() in a timely manner in the
event that the connection fails
or
2) The application is working in a constrained environment where there
is very little free memory
or
3) The attacker initiates multiple connection attempts such that there
are multiple connections in a state where memory has been allocated for
the connection; SSL_free() has not yet been called; and there is
insufficient memory to service the multiple requests.
Except in the instance of (1) above any Denial Of Service is likely to
be transitory because as soon as the connection fails the memory is
subsequently freed again in the SSL_free() call. However there is an
increased risk during this period of application crashes due to the lack
of memory - which would then mean a more serious Denial of Service.
This issue does not affect TLS users.
Issue was reported by Shi Lei (Gear Team, Qihoo 360 Inc.).
CVE-2016-6308
Reviewed-by: Richard Levitte <levitte@openssl.org>
A TLS message includes 3 bytes for its length in the header for the message.
This would allow for messages up to 16Mb in length. Messages of this length
are excessive and OpenSSL includes a check to ensure that a peer is sending
reasonably sized messages in order to avoid too much memory being consumed
to service a connection. A flaw in the logic of version 1.1.0 means that
memory for the message is allocated too early, prior to the excessive
message length check. Due to way memory is allocated in OpenSSL this could
mean an attacker could force up to 21Mb to be allocated to service a
connection. This could lead to a Denial of Service through memory
exhaustion. However, the excessive message length check still takes place,
and this would cause the connection to immediately fail. Assuming that the
application calls SSL_free() on the failed conneciton in a timely manner
then the 21Mb of allocated memory will then be immediately freed again.
Therefore the excessive memory allocation will be transitory in nature.
This then means that there is only a security impact if:
1) The application does not call SSL_free() in a timely manner in the
event that the connection fails
or
2) The application is working in a constrained environment where there
is very little free memory
or
3) The attacker initiates multiple connection attempts such that there
are multiple connections in a state where memory has been allocated for
the connection; SSL_free() has not yet been called; and there is
insufficient memory to service the multiple requests.
Except in the instance of (1) above any Denial Of Service is likely to
be transitory because as soon as the connection fails the memory is
subsequently freed again in the SSL_free() call. However there is an
increased risk during this period of application crashes due to the lack
of memory - which would then mean a more serious Denial of Service.
This issue does not affect DTLS users.
Issue was reported by Shi Lei (Gear Team, Qihoo 360 Inc.).
CVE-2016-6307
Reviewed-by: Richard Levitte <levitte@openssl.org>
All the other functions that take an argument for the number of bytes
use convenience macros for this purpose. We should do the same with
WPACKET_put_bytes().
Reviewed-by: Rich Salz <rsalz@openssl.org>
Makes the logic a little bit clearer.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1571)
Updated the construction code to use the new function. Also added some
convenience macros for WPACKET_sub_memcpy().
Reviewed-by: Rich Salz <rsalz@openssl.org>
A few style tweaks here and there. The main change is that curr and
packet_len are now offsets into the buffer to account for the fact that
the pointers can change if the buffer grows. Also dropped support for the
WPACKET_set_packet_len() function. I thought that was going to be needed
but so far it hasn't been. It doesn't really work any more due to the
offsets change.
Reviewed-by: Rich Salz <rsalz@openssl.org>
The function tls_construct_cert_status() is called by both TLS and DTLS
code. However it only ever constructed a TLS message header for the message
which obviously failed in DTLS.
Reviewed-by: Rich Salz <rsalz@openssl.org>
DTLS can handle out of order record delivery. Additionally since
handshake messages can be bigger than will fit into a single packet, the
messages can be fragmented across multiple records (as with normal TLS).
That means that the messages can arrive mixed up, and we have to
reassemble them. We keep a queue of buffered messages that are "from the
future", i.e. messages we're not ready to deal with yet but have arrived
early. The messages held there may not be full yet - they could be one
or more fragments that are still in the process of being reassembled.
The code assumes that we will eventually complete the reassembly and
when that occurs the complete message is removed from the queue at the
point that we need to use it.
However, DTLS is also tolerant of packet loss. To get around that DTLS
messages can be retransmitted. If we receive a full (non-fragmented)
message from the peer after previously having received a fragment of
that message, then we ignore the message in the queue and just use the
non-fragmented version. At that point the queued message will never get
removed.
Additionally the peer could send "future" messages that we never get to
in order to complete the handshake. Each message has a sequence number
(starting from 0). We will accept a message fragment for the current
message sequence number, or for any sequence up to 10 into the future.
However if the Finished message has a sequence number of 2, anything
greater than that in the queue is just left there.
So, in those two ways we can end up with "orphaned" data in the queue
that will never get removed - except when the connection is closed. At
that point all the queues are flushed.
An attacker could seek to exploit this by filling up the queues with
lots of large messages that are never going to be used in order to
attempt a DoS by memory exhaustion.
I will assume that we are only concerned with servers here. It does not
seem reasonable to be concerned about a memory exhaustion attack on a
client. They are unlikely to process enough connections for this to be
an issue.
A "long" handshake with many messages might be 5 messages long (in the
incoming direction), e.g. ClientHello, Certificate, ClientKeyExchange,
CertificateVerify, Finished. So this would be message sequence numbers 0
to 4. Additionally we can buffer up to 10 messages in the future.
Therefore the maximum number of messages that an attacker could send
that could get orphaned would typically be 15.
The maximum size that a DTLS message is allowed to be is defined by
max_cert_list, which by default is 100k. Therefore the maximum amount of
"orphaned" memory per connection is 1500k.
Message sequence numbers get reset after the Finished message, so
renegotiation will not extend the maximum number of messages that can be
orphaned per connection.
As noted above, the queues do get cleared when the connection is closed.
Therefore in order to mount an effective attack, an attacker would have
to open many simultaneous connections.
Issue reported by Quan Luo.
CVE-2016-2179
Reviewed-by: Richard Levitte <levitte@openssl.org>
Run util/openssl-format-source on ssl/
Some comments and hand-formatted tables were fixed up
manually by disabling auto-formatting.
Reviewed-by: Rich Salz <rsalz@openssl.org>
When handling ECDH check to see if the curve is "custom" (X25519 is
currently the only curve of this type) and instead of setting a curve
NID just allocate a key of appropriate type.
Reviewed-by: Rich Salz <rsalz@openssl.org>
DTLSv1_client_method() is deprecated, but it was the only way to obtain
DTLS1_BAD_VER support. The SSL_OP_CISCO_ANYCONNECT hack doesn't work with
DTLS_client_method(), and it's relatively non-trivial to make it work without
expanding the hack into lots of places.
So deprecate SSL_OP_CISCO_ANYCONNECT with DTLSv1_client_method(), and make
it work with SSL_CTX_set_{min,max}_proto_version(DTLS1_BAD_VER) instead.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The Change Cipher Spec message in this ancient pre-standard version of DTLS
that Cisco are unfortunately still using in their products, is 3 bytes.
Allow it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
This is adapted from BoringSSL commit 2f87112b963.
This fixes a number of bugs where the existence of bbio was leaked in the
public API and broke things.
- SSL_get_wbio returned the bbio during the handshake. It must always return
the BIO the consumer configured. In doing so, some internal accesses of
SSL_get_wbio should be switched to ssl->wbio since those want to see bbio.
- The logic in SSL_set_rfd, etc. (which I doubt is quite right since
SSL_set_bio's lifetime is unclear) would get confused once wbio got
wrapped. Those want to compare to SSL_get_wbio.
- If SSL_set_bio was called mid-handshake, bbio would get disconnected and
lose state. It forgets to reattach the bbio afterwards. Unfortunately,
Conscrypt does this a lot. It just never ended up calling it at a point
where the bbio would cause problems.
- Make more explicit the invariant that any bbio's which exist are always
attached. Simplify a few things as part of that.
RT#4572
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fix some indentation at the same time
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1292)
- Always process ALPN (previously there was an early return in the
certificate status handling)
- Don't send a duplicate alert. Previously, both
ssl_check_clienthello_tlsext_late and its caller would send an
alert. Consolidate alert sending code in the caller.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Continuing from the previous commit. Refactor tls_process_key_exchange() to
split out into a separate function the ECDHE aspects.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Continuing from the previous commit. Refactor tls_process_key_exchange() to
split out into a separate function the DHE aspects.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Continuing from the previous commit. Refactor tls_process_key_exchange() to
split out into a separate function the SRP aspects.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The tls_process_key_exchange() function is too long. This commit starts
the process of splitting it up by moving the PSK preamble code to a
separate function.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The function tls_process_key_exchange() is too long. This commit moves
the PSK preamble processing out to a separate function.
Reviewed-by: Richard Levitte <levitte@openssl.org>
If the SSL_SESS_CACHE_NO_INTERNAL_STORE cache mode is used then we weren't
removing sessions from the external cache, e.g. if an alert occurs the
session is supposed to be automatically removed.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Don't call strncpy with strlen of the source as the length. Don't call
strlen multiple times. Eventually we will want to replace this with a proper
PACKET style handling (but for construction of PACKETs instead of just
reading them as it is now). For now though this is safe because
PSK_MAX_IDENTITY_LEN will always fit into the destination buffer.
This addresses an OCAP Audit issue.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Continuing previous commit to break up the
tls_construct_client_key_exchange() function. This splits out the SRP
code.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Continuing previous commit to break up the
tls_construct_client_key_exchange() function. This splits out the GOST
code.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Continuing previous commit to break up the
tls_construct_client_key_exchange() function. This splits out the ECDHE
code.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Continuing previous commit to break up the
tls_construct_client_key_exchange() function. This splits out the DHE
code.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The tls_construct_client_key_exchange() function is too long. This splits
out the construction of the PSK pre-amble into a separate function as well
as the RSA construction.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Continuing from the previous commits, this splits out the GOST code into
a separate function from the process CKE code.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Continuing from the previous commits, this splits out the ECDHE code into
a separate function from the process CKE code.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Continuing from the previous commit, this splits out the DHE code into
a separate function from the process CKE code.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The tls_process_client_key_exchange() function is far too long. This
splits out the PSK preamble processing, and the RSA processing into
separate functions.
Reviewed-by: Richard Levitte <levitte@openssl.org>
In preparation for splitting this function up into smaller functions this
commit reduces the scope of some of the variables to only be in scope for
the algorithm specific parts. In some cases that makes the error handling
more verbose than it needs to be - but we'll clean that up in a later
commit.
Reviewed-by: Richard Levitte <levitte@openssl.org>
The logic testing whether a CKE message is allowed or not was a little
difficult to follow. This tries to clean it up.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
The static function key_exchange_expected() used to return -1 on error.
Commit 361a119127 changed that so that it can never fail. This means that
some tidy up can be done to simplify error handling in callers of that
function.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Having received a ClientKeyExchange message instead of a Certificate we
know that we are not going to receive a CertificateVerify message. This
means we can free up the handshake_buffer. However we better call
ssl3_digest_cached_records() instead of just freeing it up, otherwise we
later try and use it anyway and a core dump results. This could happen,
for example, in SSLv3 where we send a CertificateRequest but the client
sends no Certificate message at all. This is valid in SSLv3 (in TLS
clients are required to send an empty Certificate message).
Found using the BoringSSL test suite.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
In TLS if the server sends a CertificateRequest and the client does not
provide one, if the server cannot continue it should send a
HandshakeFailure alert. In SSLv3 the same should happen, but instead we
were sending an UnexpectedMessage alert. This is incorrect - the message
isn't unexpected - it is valid for the client not to send one - its just
that we cannot continue without one.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Move the preparation of the client certificate to be post processing work
after reading the CertificateRequest message rather than pre processing
work prior to writing the Certificate message. As part of preparing the
client certificate we may discover that we do not have one available. If
we are also talking SSLv3 then we won't send the Certificate message at
all. However, if we don't discover this until we are about to send the
Certificate message it is too late and we send an empty one anyway. This
is wrong for SSLv3.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
The set0 setters take ownership of their arguments, so the values should
be set to NULL to avoid a double-free in the cleanup block should
ssl_security(SSL_SECOP_TMP_DH) fail. Found by BoringSSL's WeakDH test.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1299)
We calculate the size required for the ServerKeyExchange message and then
call BUF_MEM_grow_clean() on the buffer. However we fail to take account of
2 bytes required for the signature algorithm and 2 bytes for the signature
length, i.e. we could overflow by 4 bytes. In reality this won't happen
because the buffer is pre-allocated to a large size that means it should be
big enough anyway.
Addresses an OCAP Audit issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1264)
Using RSA_PKCS1_PADDING with RSA_private_decrypt is inherently unsafe.
The API requires writing output on success and touching the error queue
on error. Thus, although the padding check itself is constant-time as of
294d1e36c2, and the logic after the
decryption in the SSL code is constant-time as of
adb46dbc6d, the API boundary in the middle
still leaks whether the padding check succeeded, giving us our
much-loved Bleichenbacher padding oracle.
Instead, PKCS#1 padding must be handled by the caller which uses
RSA_NO_PADDING, in timing-sensitive code integrated with the
Bleichenbacher mitigation. Removing PKCS#1 padding in constant time is
actually much simpler when the expected length is a constant (and if
it's not a constant, avoiding a padding oracle seems unlikely), so just
do it inline.
Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
GH: #1222
When session tickets are used, it's possible that SNI might swtich the
SSL_CTX on an SSL. Normally, this is not a problem, because the
initial_ctx/session_ctx are used for all session ticket/id processes.
However, when the SNI callback occurs, it's possible that the callback
may update the options in the SSL from the SSL_CTX, and this could
cause SSL_OP_NO_TICKET to be set. If this occurs, then two bad things
can happen:
1. The session ticket TLSEXT may not be written when the ticket expected
flag is set. The state machine transistions to writing the ticket, and
the client responds with an error as its not expecting a ticket.
2. When creating the session ticket, if the ticket key cb returns 0
the crypto/hmac contexts are not initialized, and the code crashes when
trying to encrypt the session ticket.
To fix 1, if the ticket TLSEXT is not written out, clear the expected
ticket flag.
To fix 2, consider a return of 0 from the ticket key cb a recoverable
error, and write a 0 length ticket and continue. The client-side code
can explicitly handle this case.
Fix these two cases, and add unit test code to validate ticket behavior.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1098)
The ssl3_init_finished_mac() function can fail, in which case we need to
propagate the error up through the stack.
RT#3198
Reviewed-by: Rich Salz <rsalz@openssl.org>
In the new state machine if using nbio and we get the header of a
handshake message is one record with the body in the next, with an nbio
event in the middle, then the connection was failing. This is because
s->init_num was getting reset. We should only reset it after we have
read the whole message.
RT#4394
Reviewed-by: Andy Polyakov <appro@openssl.org>
ChangeCipherSpec messages have a defined value. They also may not occur
in the middle of a handshake message. The current logic will accept a
ChangeCipherSpec with value 2. It also would accept up to three bytes of
handshake data before the ChangeCipherSpec which it would discard
(because s->init_num gets reset).
Instead, require that s->init_num is 0 when a ChangeCipherSpec comes in.
RT#4391
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The write BIO for handshake messages is bufferred so that we only write
out to the network when we have a complete flight. There was some
complexity in the buffering logic so that we switched buffering on and
off at various points through out the handshake. The only real reason to
do this was historically it complicated the state machine when you wanted
to flush because you had to traverse through the "flush" state (in order
to cope with NBIO). Where we knew up front that there was only going to
be one message in the flight we switched off buffering to avoid that.
In the new state machine there is no longer a need for a flush state so
it is simpler just to have buffering on for the whole handshake. This
also gives us the added benefit that we can simply call flush after every
flight even if it only has one message in it. This means that BIO authors
can implement their own buffering strategies and not have to be aware of
the state of the SSL object (previously they would have to switch off
their own buffering during the handshake because they could not rely on
a flush being received when they really needed to write data out). This
last point addresses GitHub Issue #322.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Set ctx->error = X509_V_ERR_OUT_OF_MEM when verificaiton cannot
continue due to malloc failure. Also, when X509_verify_cert()
returns <= 0 make sure that the verification status does not remain
X509_V_OK, as a last resort set it it to X509_V_ERR_UNSPECIFIED,
just in case some code path returns an error without setting an
appropriate value of ctx->error.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This involves providing more session ticket key data, for both the cipher and
the digest
Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matt Caswell <matt@openssl.org>
GH: #515, MR: #2153
The current limit of 2^14 bytes is too low (e.g. RFC 5246 specifies the
maximum size of just the extensions field to be 2^16-1), and may cause
bogus failures.
RT#4063
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/413)
Per RFC 4507, section 3.3:
This message [NewSessionTicket] MUST be sent if the
server included a SessionTicket extension in the ServerHello. This
message MUST NOT be sent if the server did not include a
SessionTicket extension in the ServerHello.
The presence of the NewSessionTicket message should be determined
entirely from the ServerHello without probing.
RT#4389
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The V2ClientHello code creates an empty compression list, but the
compression list must explicitly contain the null compression (and later
code enforces this).
RT#4387
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
The tls_client_key_exchange_post_work() frees the pms on error. It also
calls ssl_generate_master_secret() which also free the pms. If an error
occurs after ssl_generate_master_secret() has been called then a double
free can occur.
Reviewed-by: Andy Polyakov <appro@openssl.org>
If we fail halfway through constructing the peer_tmp EVP_PKEY but we have
already stored it in s->s3->peer_tmp then if anything tries to use it then
it will likely fail. This was causing s_client to core dump in the
sslskewith0p test. s_client was trying to print out the connection
parameters that it had negotiated so far. Arguably s_client should not do
that if the connection has failed...but given it is existing functionality
it's easier to fix libssl.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Move the dh_st structure into an internal header file and provide
relevant accessors for the internal fields.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Suppress CT callbacks with aNULL or PSK ciphersuites that involve
no certificates. Ditto when the certificate chain is validated via
DANE-TA(2) or DANE-EE(3) TLSA records. Also skip SCT processing
when the chain is fails verification.
Move and consolidate CT callbacks from libcrypto to libssl. We
also simplify the interface to SSL_{,CTX_}_enable_ct() which can
specify either a permissive mode that just collects information or
a strict mode that requires at least one valid SCT or else asks to
abort the connection.
Simplified SCT processing and options in s_client(1) which now has
just a simple pair of "-noct" vs. "-ct" options, the latter enables
the permissive callback so that we can complete the handshake and
report all relevant information. When printing SCTs, print the
validation status if set and not valid.
Signed-off-by: Rob Percival <robpercival@google.com>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
The original check for != SSL_VERIFY_NONE can give surprising results
when flags SSL_VERIFY_PEER is not set, but other flags are. Note
that SSL_VERIFY_NONE (0) is not a flag bit, it is rather the absense
of all other flag bits.
Signed-off-by: Rob Percival <robpercival@google.com>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Free up parsed X509_NAME structure if the CertificateRequest message
contains excess data.
The security impact is considered insignificant. This is a client side
only leak and a large number of connections to malicious servers would
be needed to have a significant impact.
This was found by libFuzzer.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
Session resumption involves a version check, so version negotiation must
happen first. Currently, the DTLS implementation cannot do session
resumption in DTLS 1.0 because the ssl_version check always checks
against 1.2.
Switching the order also removes the need to fixup ssl_version in DTLS
version negotiation.
Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
RT: #4392, MR: #2452
We now send the highest supported version by the client, even if the session
uses an older version.
This fixes 2 problems:
- When you try to reuse a session but the other side doesn't reuse it and
uses a different protocol version the connection will fail.
- When you're trying to reuse a session with an old version you might be
stuck trying to reuse the old version while both sides support a newer
version
Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
GH: #852, MR: #2452
Don't have #error statements in header files, but instead wrap
the contents of that file in #ifndef OPENSSL_NO_xxx
This means it is now always safe to include the header file.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Adjust ssl_set_client_hello_version to get both the minimum and maximum and then
make ssl_set_client_hello_version use the maximum version.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
MR: #1595
Disabled by default, but can be enabled by setting the
ct_validation_callback on a SSL or SSL_CTX.
Reviewed-by: Ben Laurie <ben@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Add -DBIO_DEBUG to --strict-warnings.
Remove comments about outdated debugging ifdef guards.
Remove md_rand ifdef guarding an assert; it doesn't seem used.
Remove the conf guards in conf_api since we use OPENSSL_assert, not assert.
For pkcs12 stuff put OPENSSL_ in front of the macro name.
Merge TLS_DEBUG into SSL_DEBUG.
Various things just turned on/off asserts, mainly for checking non-NULL
arguments, which is now removed: camellia, bn_ctx, crypto/modes.
Remove some old debug code, that basically just printed things to stderr:
DEBUG_PRINT_UNKNOWN_CIPHERSUITES, DEBUG_ZLIB, OPENSSL_RI_DEBUG,
RL_DEBUG, RSA_DEBUG, SCRYPT_DEBUG.
Remove OPENSSL_SSL_DEBUG_BROKEN_PROTOCOL.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove support for static ECDH ciphersuites. They require ECDH keys
in certificates and don't support forward secrecy.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
PACKET contents should be read-only. To achieve this, also
- constify two user callbacks
- constify BUF_reverse.
Reviewed-by: Rich Salz <rsalz@openssl.org>
This was done by the following
find . -name '*.[ch]' | /tmp/pl
where /tmp/pl is the following three-line script:
print unless $. == 1 && m@/\* .*\.[ch] \*/@;
close ARGV if eof; # Close file to reset $.
And then some hand-editing of other files.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
This is an internal facility, never documented, not for
public consumption. Move it into ssl (where it's only used
for DTLS).
I also made the typedef's for pqueue and pitem follow our style: they
name structures, not pointers.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Some users want to disable SSL 3.0/TLS 1.0/TLS 1.1, and enable just
TLS 1.2. In the future they might want to disable TLS 1.2 and
enable just TLS 1.3, ...
This commit makes it possible to disable any or all of the TLS or
DTLS protocols. It also considerably simplifies the SSL/TLS tests,
by auto-generating the min/max version tests based on the set of
supported protocols (425 explicitly written out tests got replaced
by two loops that generate all 425 tests if all protocols are
enabled, fewer otherwise).
Reviewed-by: Richard Levitte <levitte@openssl.org>
The protocol selection code is now consolidated in a few consecutive
short functions in a single file and is table driven. Protocol-specific
constraints that influence negotiation are moved into the flags
field of the method structure. The same protocol version constraints
are now applied in all code paths. It is now much easier to add
new protocol versions without reworking the protocol selection
logic.
In the presence of "holes" in the list of enabled client protocols
we no longer select client protocols below the hole based on a
subset of the constraints and then fail shortly after when it is
found that these don't meet the remaining constraints (suiteb, FIPS,
security level, ...). Ideally, with the new min/max controls users
will be less likely to create "holes" in the first place.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Previous versions of OpenSSL had the max size limit for a CertificateRequest
message as |s->max_cert_list|. Previously master had it to be
SSL3_RT_MAX_PLAIN_LENGTH. However these messages can get quite long if a
server is configured with a long list of acceptable CA names. Therefore
the size limit has been increased to be consistent with previous versions.
RT#4198
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Move all calls of the OCSP callback into one place, rather than repeating it
in two different places.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
If a server sends the status_request extension then it may choose
to send the CertificateStatus message. However this is optional.
We were treating it as mandatory and the connection was failing.
Thanks to BoringSSL for reporting this issue.
RT#4120
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
When EC is disabled, and an error occurs in ssl_generate_master_secret()
or RAND_bytes(), the error path does not free rsa_decrypt.
RT#4197
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
After the recent change to use ossl_inline, builds were failing on some
platforms due to a missing usage of "inline".
Reviewed-by: Richard Levitte <levitte@openssl.org>
Rename BUF_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
to OPENSSL_{strdup,strlcat,strlcpy,memdup,strndup,strnlen}
Add #define's for the old names.
Add CRYPTO_{memdup,strndup}, called by OPENSSL_{memdup,strndup} macros.
Reviewed-by: Tim Hudson <tjh@openssl.org>
GCM and CCM are modes of operation for block ciphers only. ChaCha20-Poly1305
operates in neither of them but it is AEAD. This change also enables future
AEAD ciphers to be available for use with DTLS.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
This reverts commit 777f482d99.
Author credit missing. Reverting this and re-committing with
an Author line.
Reviewed-by: Matt Caswell <matt@openssl.org>
GCM and CCM are modes of operation for block ciphers only. ChaCha20-Poly1305
operates in neither of them but it is AEAD. This change also enables future
AEAD ciphers to be available for use with DTLS.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
A BIO_flush call in the DTLS code was not correctly setting the |rwstate|
variable to SSL_WRITING. This means that SSL_get_error() will not return
SSL_ERROR_WANT_WRITE in the event of an IO retry.
Reviewed-by: Richard Levitte <levitte@openssl.org>
If using DTLS and NBIO then if a second or subsequent handshake message
fragment hits a retry, then the retry attempt uses the wrong fragment
offset value. This commit restores the fragment offset from the last
attempt.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This change required some special treatment, as HMAC is intertwined
with EVP_MD. For now, all local HMAC_CTX variables MUST be
initialised with HMAC_CTX_EMPTY, or whatever happens to be on the
stack will be mistaken for actual pointers to EVP_MD_CTX. This will
change as soon as HMAC_CTX becomes opaque.
Also, since HMAC_CTX_init() can fail now, its return type changes from
void to int, and it will return 0 on failure, 1 on success.
Reviewed-by: Rich Salz <rsalz@openssl.org>
SSL_{CTX}_set_tmp_ecdh() allows to set 1 EC curve and then tries to use it. On
the other hand SSL_{CTX_}set1_curves() allows you to set a list of curves, but
only when SSL_{CTX_}set_ecdh_auto() was called to turn it on.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
This only gets used to set a specific curve without actually checking that the
peer supports it or not and can therefor result in handshake failures that can
be avoided by selecting a different cipher.
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
The new state machine code missed an allowed transition when resuming a
session via EAP FAST. This commits adds the missing check for the
transition.
Reviewed-by: Andy Polyakov <appro@openssl.org>
This patch contains the necessary changes to provide GOST 2012
ciphersuites in TLS. It requires the use of an external GOST 2012 engine.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
There are lots of calls to EVP functions from within libssl There were
various places where we should probably check the return value but don't.
This adds these checks.
Reviewed-by: Richard Levitte <levitte@openssl.org>
This disables some ciphersuites which aren't supported in SSL v3:
specifically PSK ciphersuites which use SHA256 or SHA384 for the MAC.
Thanks to the Open Crypto Audit Project for identifying this issue.
Reviewed-by: Matt Caswell <matt@openssl.org>
if we have a malloc |x = OPENSSL_malloc(...)| sometimes we check |x|
for NULL and sometimes we treat it as a boolean |if(!x) ...|. Standardise
the approach in libssl.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
We were setting |s->renegotiate| and |s->new_session| to 0 twice in
tls_finish_handshake. This is redundant so now we just do it once!
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
We finish the handshake when we move into the TLS_ST_OK state. At various
points we were also unnecessarily finishing it when we were reading/writing
the Finished message. It's much simpler just to do it in TLS_ST_OK, so
remove the other calls.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
There was a discrepancy between what ciphersuites we allowed to send a
CertificateRequest, and what ciphersuites we allowed to receive one. So
add PSK and SRP to the disallowed ones.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Some functions were marked as inline in statem_srvr.c where they probably
didn't need to be, so remove it.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
|tls_process_finished| was checking that |peer_finish_md_len| was
non-negative. However neither |tls1_final_finish_mac| or
|ssl3_final_finish_mac| can ever return a negative value, so the check is
superfluous.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
There was a few uses of snprintf in the DTLS SCTP code which made more
sense to be a memcpy.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add the ossl_statem prefix to various funtions to avoid name clashes.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Various enums were introduced as part of the state machine rewrite. As a
matter of style it is preferred for these to be typedefs.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Clang with --strict-warnings was complaining about an uninitalised
variable. In reality it will never be used uninitialised but clang can't
figure out the logic, so just init it anyway to silence the warning.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Rebasing the state machine code introduced a problem with empty
NewSessionTicket processing. The return value from the
tls_process_new_session_ticket() is supposed to be an enum, but a bare
integer was being used. Unfortunately this is valid C so the compiler
doesn't pick it up.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fix another instance of |al| being unitialised in certain error scenarios.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
A number of error codes were wrong due to a rebase of the state machine
code.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The SSL variable |in_handshake| seems misplaced. It would be better to have
it in the STATEM structure.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
tls_process_client_hello() failed to initialise the |al| variable in some
(error) scenarios. This could cause issues with creating the alert.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Adding the new state machine broke the DTLSv1_listen code because
calling SSL_in_before() was erroneously returning true after DTLSv1_listen
had successfully completed. This change ensures that SSL_in_before returns
false.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Remove repeated blocks of checking SSL and then SSL_CTX for the
info_callback.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
SSL_state has been replaced by SSL_get_state and SSL_set_state is no longer
supported.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
The |no_cert_verify| should be in the state machine structure not in SSL
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Change various state machine functions to use the prefix ossl_statem
instead.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Rename the enum HANDSHAKE_STATE to OSSL_HANDSHAKE_STATE to ensure there are
no namespace clashes, and convert it into a typedef.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fixed some issues in the logic for determining whether an SKE should be
expected or not. In particular only allow an SKE for RSA if its export and
the key size is not allowed. Also fix the ephemeral ciphersuite checks and
add in a missing call to ssl3_check_cert_and_algorithm().
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Fix an out of date reference to old state machine code in a comment
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Add some documentation on the thinking behind the state machine.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Move some function definitions around within the state machine to make sure
they are in the correct files. Also create a statem_locl.h header for stuff
entirely local to the state machine code and move various definitions into
it.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Pull out the state machine into a separate sub directory. Also moved some
functions which were nothing to do with the state machine but were in state
machine files. Pulled all the SSL_METHOD definitions into one place...most
of those files had very little left in them any more.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
