{make|swap|get|set}context are removed in POSIX.1-2008, but glibc
apparently keeps providing it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7420)
(cherry picked from commit 9d71a24ebf)
Also, some readers of the code find starting the count at 1 for EE
cert confusing (since RFC5280 counts only non-self-issued intermediate
CAs, but we also counted the leaf). Therefore, never count the EE
cert, and adjust the path length comparison accordinly. This may
be more clear to the reader.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit dc5831da59)
At the bottom of https://tools.ietf.org/html/rfc5280#page-12 and
top of https://tools.ietf.org/html/rfc5280#page-13 (last paragraph
of above https://tools.ietf.org/html/rfc5280#section-3.3), we see:
This specification covers two classes of certificates: CA
certificates and end entity certificates. CA certificates may be
further divided into three classes: cross-certificates, self-issued
certificates, and self-signed certificates. Cross-certificates are
CA certificates in which the issuer and subject are different
entities. Cross-certificates describe a trust relationship between
the two CAs. Self-issued certificates are CA certificates in which
the issuer and subject are the same entity. Self-issued certificates
are generated to support changes in policy or operations. Self-
signed certificates are self-issued certificates where the digital
signature may be verified by the public key bound into the
certificate. Self-signed certificates are used to convey a public
key for use to begin certification paths. End entity certificates
are issued to subjects that are not authorized to issue certificates.
that the term "self-issued" is only applicable to CAs, not end-entity
certificates. In https://tools.ietf.org/html/rfc5280#section-4.2.1.9
the description of path length constraints says:
The pathLenConstraint field is meaningful only if the cA boolean is
asserted and the key usage extension, if present, asserts the
keyCertSign bit (Section 4.2.1.3). In this case, it gives the
maximum number of non-self-issued intermediate certificates that may
follow this certificate in a valid certification path. (Note: The
last certificate in the certification path is not an intermediate
certificate, and is not included in this limit. Usually, the last
certificate is an end entity certificate, but it can be a CA
certificate.)
This makes it clear that exclusion of self-issued certificates from
the path length count applies only to some *intermediate* CA
certificates. A leaf certificate whether it has identical issuer
and subject or whether it is a CA or not is never part of the
intermediate certificate count. The handling of all leaf certificates
must be the same, in the case of our code to post-increment the
path count by 1, so that we ultimately reach a non-self-issued
intermediate it will be the first one (not zeroth) in the chain
of intermediates.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit ed422a2d01)
Replace ECDH_KDF_X9_62() with internal ecdh_KDF_X9_63()
Signed-off-by: Antoine Salon <asalon@vmware.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/7345)
(cherry picked from commit ffd89124bd)
In pull request #4328 the seeding of the DRBG via RAND_add()/RAND_seed()
was implemented by buffering the data in a random pool where it is
picked up later by the rand_drbg_get_entropy() callback. This buffer
was limited to the size of 4096 bytes.
When a larger input was added via RAND_add() or RAND_seed() to the DRBG,
the reseeding failed, but the error returned by the DRBG was ignored
by the two calling functions, which both don't return an error code.
As a consequence, the data provided by the application was effectively
ignored.
This commit fixes the problem by a more efficient implementation which
does not copy the data in memory and by raising the buffer the size limit
to INT32_MAX (2 gigabytes). This is less than the NIST limit of 2^35 bits
but it was chosen intentionally to avoid platform dependent problems
like integer sizes and/or signed/unsigned conversion.
Additionally, the DRBG is now less permissive on errors: In addition to
pushing a message to the openssl error stack, it enters the error state,
which forces a reinstantiation on next call.
Thanks go to Dr. Falko Strenzke for reporting this issue to the
openssl-security mailing list. After internal discussion the issue
has been categorized as not being security relevant, because the DRBG
reseeds automatically and is fully functional even without additional
randomness provided by the application.
Fixes#7381
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7382)
(cherry picked from commit 3064b55134)
We don't need to use secure clean for public key.
CLA: trivial
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/7363)
(cherry picked from commit c033101db3)
Negative displacement in memory references was not originally specified,
so that for maximum coverage one should abstain from it, just like with
any other extension. [Unless it's guarded by run-time switch, but there
is no switch in keccak1600-s390x.]
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7239)
(cherry picked from commit fc97c882f4)
Fixes a compiler warning about an unused syscall_random()
and cleans up the OPENSSL_RAND_SEED preprocessor logic.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/779)
(cherry picked from commit d90e128be6)
Should be 2018 instead of 20018.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7364)
We passed that ioctl a pointer to the whole session_op structure,
which wasn't quite right.
Notified by David Legault.
Fixes#7302
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/7304)
(cherry picked from commit 470096e576)
The BIO callback handling incorrectly wrote over the return code passed
to the callback, meaning that an incorrect result was (eventually) returned
to the caller.
Fixes#7343
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7344)
(cherry picked from commit d97ce8d9a0)
BIO_s_log() is declared for everyone, so should return NULL when not
actually implemented. Also, it had explicit platform limitations in
util/mkdef.pl that didn't correspond to what was actually in code.
While at it, a few other hard coded things that have lost their
relevance were removed.
include/openssl/ocsp.h had a few duplicate declarations.
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/7331)
(cherry picked from commit 7e09c5eaa5)
Change all calls to getenv() inside libcrypto to use a new wrapper function
that use secure_getenv() if available and an issetugid then getenv if not.
CPU processor override flags are unchanged.
Extra checks for OPENSSL_issetugid() have been removed in favour of the
safe getenv.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/7047)
(cherry picked from commit 5c39a55d04)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7277)
(cherry picked from commit 46d085096c)
This module includes bn.h via other headers, so it picks up the
definition from there and doesn't need to define them locally (any
more?). Worst case scenario, the redefinition may be different and
cause all sorts of compile errors.
Fixes#7227
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/7287)
(cherry picked from commit dda5396aae)
These both indicate that the file descriptor we're trying to use as a
terminal isn't, in fact, a terminal.
Fixes#7271
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7272)
(cherry picked from commit 276bf8620c)
The latter causes problems when complex.h is #included.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7233)
(cherry picked from commit 972f67889b)
It simply isn't available on older versions.
Issue submitted by Mark Daniels
Fixes#7229
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7230)
The new DRBG API added the aforementioned #define. However, it is
used internally only and having it defined publicly does not serve
any purpose except causing potential version compatibility problems.
Fixes#7182
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7190)
(cherry picked from commit c402e943cd)
- fix to use secure URL in generated Windows resources
- fix a potentially uninitialized variable
- fix an unused variable warning
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7189)
Reported by Coverity Scan (CID 1439138)
[extended tests]
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7156)
The deprecated ASN.1 type LONG / ZLONG (incorrectly) produced zero
length INTEGER encoding for zeroes. For the sake of backward
compatibility, we allow those to be read without fault when using the
replacement types INT32 / UINT32 / INT64 / UINT64.
Fixes#7134
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7144)
This was originally part of SipHash_Init. However, there are cases
where there isn't any key material to initialize from when setting the
hash size, and we do allow doing so with a EVP_PKEY control. The
solution is to provide a separate hash_size setter and to use it in
the corresponding EVP_PKEY_METHOD.
Fixes#7143
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7145)
zero-length ID is allowed, but it's not allowed to skip the ID.
Fixes: #6534
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7113)
Thus users can use this function to set customized EVP_PKEY_CTX to
EVP_MD_CTX structure.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7113)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7121)
`RSA_free()` and friends are called in case of error from
`RSA_new_method(ENGINE *e)` (or the respective equivalent functions).
For the rest of the description I'll talk about `RSA_*`, but the same
applies for the equivalent `DSA_free()`, `DH_free()`, `EC_KEY_free()`.
If `RSA_new_method()` fails because the engine does not implement the
required method, when `RSA_free(RSA *r)` is called,
`r->meth == NULL` and a segfault happens while checking if
`r->meth->finish` is defined.
This commit fixes this issue by ensuring that `r->meth` is not NULL
before dereferencing it to check for `r->meth->finish`.
Fixes#7102 .
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7121)
Added NIST test cases for these two as well.
Additionally deprecate the public definiton of HMAC_MAX_MD_CBLOCK in 1.2.0.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6972)
Add one more unit test case
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/6892)
This trivial patch removes a duplicated call to ASN1_INTEGER_set.
Fixes Issue #6977
Signed-off-by: Eric Brown <browne@vmware.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6984)
asn1_encode has two form length octets: short form(1 byte), long form(1+n byte).
CLA: Trivial
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7027)
In [most common] case of p and q being of same width, it's possible to
replace CRT modulo operations with Montgomery reductions. And those are
even fixed-length Montgomery reductions...
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6915)
Add bn_{mul|sqr}_fixed_top, bn_from_mont_fixed_top, bn_mod_sub_fixed_top.
Switch to bn_{mul|sqr}_fixed_top in bn_mul_mont_fixed_top and remove
memset in bn_from_montgomery_word.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6915)
The shared libraries are now stored as members of archives, as it is usual
on AIX. To correctly address this the custom dladdr()-implementation as
well as the dlfcn_load() routine need to be able to cope with such a
construct: libname.a(libname.so).
Signed-off-by: Matthias Kraft <Matthias.Kraft@softwareag.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6872)
It was assumed that CRYPTO_THREAD_LOCAL is universally scalar type,
which doesn't appear to hold true.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6976)
Original could allocate nid and then bail out on malloc failure. Instead
allocate first *then* attempt to create object.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6998)
Previously you had to supply "null" as the digest to use EdDSA. This changes
things so that any digest is ignored.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6901)
Fixes#7022
In pull request #6432 a change was made to keep the handles to the
random devices opened in order to avoid reseeding problems for
applications in chroot environments.
As a consequence, the handles of the random devices were leaked at exit
if the random generator was not used by the application. This happened,
because the call to RAND_set_rand_method(NULL) in rand_cleanup_int()
triggered a call to the call_once function do_rand_init, which opened
the random devices via rand_pool_init().
Thanks to GitHub user @bwelling for reporting this issue.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7023)
This commit destroys the free list pointers which would otherwise be
present in the returned memory blocks. This in turn helps prevent
information leakage from the secure memory area.
Note: CRYPTO_secure_malloc is not guaranteed to return zeroed memory:
before the secure memory system is initialised or if it isn't implemented.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7011)
The EFD database does not state that the "ladd-2002-it-3" algorithm
assumes X1 != 0.
Consequently the current implementation, based on it, fails to compute
correctly if the affine x coordinate of the scalar multiplication input
point is 0.
We replace this implementation using the alternative algorithm based on
Eq. (9) and (10) from the same paper, which being derived from the
additive relation of (6) does not incur in this problem, but costs one
extra field multiplication.
The EFD entry for this algorithm is at
https://hyperelliptic.org/EFD/g1p/auto-shortw-xz.html#ladder-ladd-2002-it-4
and the code to implement it was generated with tooling.
Regression tests add one positive test for each named curve that has
such a point. The `SharedSecret` was generated independently from the
OpenSSL codebase with sage.
This bug was originally reported by Dmitry Belyavsky on the
openssl-users maling list:
https://mta.openssl.org/pipermail/openssl-users/2018-August/008540.html
Co-authored-by: Billy Brumley <bbrumley@gmail.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7000)
Don't discard partial reads from /dev/*random and retry instead.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6990)
Fixes#6978
Don't discard partial reads from syscall_random() and retry instead.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6990)
Change return value type to ssize_t and ensure that a negative value
is returned only if a corresponding errno is set.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6990)
gcc 4.6 (arguably erroneously) warns about our use of 'free' as
the name of a function parameter, when --strict-warnings is enabled:
crypto/x509/x509_meth.c: In function 'X509_LOOKUP_meth_set_free':
crypto/x509/x509_meth.c:61:12: error: declaration of 'free' shadows a global declaration [-Werror=shadow]
cc1: all warnings being treated as errors
make[1]: *** [crypto/x509/x509_meth.o] Error 1
(gcc 4.8 is fine with this code, as are newer compilers.)
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6991)
CRYPTO_atomic_read was added with intention to read statistics counters,
but readings are effectively indistinguishable from regular load (even
in non-lock-free case). This is because you can get out-dated value in
both cases. CRYPTO_atomic_write was added for symmetry and was never used.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6883)
If application explicitly calls CONF_modules_load_file() the SSL
conf module will be initialized twice and the module data would leak.
We need to free it before initializing it again.
Fixes#6835
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6948)
Originally fopen(3) was called from bio/bss_file.c, which performed the
aliasing. Then fopen(3) was moved to o_fopen.c, while "magic" definition
was left behind. It's still useful on 32-bit platforms, so pull it to
o_fopen.c.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6596)
Since 0.9.7, all i2d_ functions were documented to allocate an output
buffer if the user didn't provide one, under these conditions (from
the 1.0.2 documentation):
For OpenSSL 0.9.7 and later if B<*out> is B<NULL> memory will be
allocated for a buffer and the encoded data written to it. In this
case B<*out> is not incremented and it points to the start of the
data just written.
i2d_ASN1_OBJECT was found not to do this, and would crash if a NULL
output buffer was provided.
Fixes#6914
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/6918)
This reverts commit 8839324450.
Removing these checks changes the behaviour of the API which is not
appropriate for a minor release. This also fixes a failure in the
fuzz tests when building with no-comp.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6895)
Rationale is that it wasn't providing accurate statistics anyway.
For statistics to be accurate CRYPTO_get_alloc_counts should acquire
a lock and lock-free additions should not be an option.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6786)
Checks are left in OPENSSL_sk_shift, OPENSSL_sk_pop and OPENSSL_sk_num.
This is because these are used as "opportunistic" readers, pulling
whatever datai, if any, set by somebody else. All calls that add data
don't check for stack being NULL, because caller should have checked
if stack was actually created.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6860)
In some cases it's about redundant check for return value, in some
cases it's about replacing check for -1 with comparison to 0.
Otherwise compiler might generate redundant check for <-1. [Even
formatting and readability fixes.]
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6860)
Documentation says "at most B<len> bytes will be written", which
formally doesn't prohibit zero. But if zero B<len> was passed, the
call to memcpy was bound to crash.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6860)
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5935)
Fixes#6800
Replaces #5418
This commit reverts commit 7876dbffce and moves the check for a
zero-length input down the callstack into sha3_update().
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6838)
Ensure that the certificate required alert actually gets sent (and doesn't
get translated into handshake failure in TLSv1.3).
Ensure that proper reason codes are given for the new TLSv1.3 alerts.
Remove an out of date macro for TLS13_AD_END_OF_EARLY_DATA. This is a left
over from an earlier TLSv1.3 draft that is no longer used.
Fixes#6804
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6809)
Some EC functions exist in *_GFp and *_GF2m forms, in spite of the
implementations between the two curve types being identical. This
commit provides equivalent generic functions with the *_GFp and *_GF2m
forms just calling the generic functions.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6815)
Also streamline the code by relying on ASN1_INTEGER_to_BN to allocate the
BN instead of doing it separately.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6821)
FIPS 186-4 does not specify a hard requirement on DSA digest lengths,
and in any case the current check rejects the FIPS recommended digest
lengths for key sizes != 1024 bits.
Fixes: #6748
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6749)
This commit leverages the Montgomery ladder scaffold introduced in #6690
(alongside a specialized Lopez-Dahab ladder for binary curves) to
provide a specialized differential addition-and-double implementation to
speedup prime curves, while keeping all the features of
`ec_scalar_mul_ladder` against SCA attacks.
The arithmetic in ladder_pre, ladder_step and ladder_post is auto
generated with tooling, from the following formulae:
- `ladder_pre`: Formula 3 for doubling from Izu-Takagi "A fast parallel
elliptic curve multiplication resistant against side channel attacks",
as described at
https://hyperelliptic.org/EFD/g1p/auto-shortw-xz.html#doubling-dbl-2002-it-2
- `ladder_step`: differential addition-and-doubling Eq. (8) and (10)
from Izu-Takagi "A fast parallel elliptic curve multiplication
resistant against side channel attacks", as described at
https://hyperelliptic.org/EFD/g1p/auto-shortw-xz.html#ladder-ladd-2002-it-3
- `ladder_post`: y-coordinate recovery using Eq. (8) from Brier-Joye
"Weierstrass Elliptic Curves and Side-Channel Attacks", modified to
work in projective coordinates.
Co-authored-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6772)
New implementation failed to correctly reset r->neg flag. Spotted by
OSSFuzz.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6783)
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/6778)
Problem was that Windows threads that were terminating before libcrypto
was initialized were referencing uninitialized or possibly even
unrelated thread local storage index.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6752)
A number intended to treat the base as secret should not be branching on
whether it is zero. Test-wise, this is covered by existing tests in bnmod.txt.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6733)
asn1_encode : x, y => 0 | x，0 | y
(because of DER encoding rules when x and y have high bit set)
CLA: Trivial
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6694)
If there's anything in the |biosk| stack, the first element is always
the input BIO. It should never be freed in this function, so we must
take careful steps not to do so inadvertently when freeing the stack.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6769)
ecp_nistz256_set_from_affine is called when application attempts to use
custom generator, i.e. rarely. Even though it was wrong, it didn't
affect point operations, they were just not as fast as expected.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6738)
The ecp_nistz256_scatter_w7 function is called when application
attempts to use custom generator, i.e. rarely. Even though non-x86_64
versions were wrong, it didn't affect point operations, they were just
not as fast as expected.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6738)
The spec says that a client MUST set legacy_version to TLSv1.2, and
requires servers to verify that it isn't SSLv3.
Fixes#6600
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6747)
Originally suggested solution for "Return Of the Hidden Number Problem"
is arguably too expensive. While it has marginal impact on slower
curves, none to ~6%, optimized implementations suffer real penalties.
Most notably sign with P-256 went more than 2 times[!] slower. Instead,
just implement constant-time BN_mod_add_quick.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/6664)
It was false positive, but one can as well view it as readability issue.
Switch even to unsigned indices because % BN_BYTES takes 4-6 instructions
with signed dividend vs. 1 (one) with unsigned.
Reviewed-by: Rich Salz <rsalz@openssl.org>
By default `ec_scalar_mul_ladder` (which uses the Lopez-Dahab ladder
implementation) is used only for (k * Generator) or (k * VariablePoint).
ECDSA verification uses (a * Generator + b * VariablePoint): this commit
forces the use of `ec_scalar_mul_ladder` also for the ECDSA verification
path, while using the default wNAF implementation for any other case.
With this commit `ec_scalar_mul_ladder` loses the static attribute, and
is added to ec_lcl.h so EC_METHODs can directly use it.
While working on a new custom EC_POINTs_mul implementation, I realized
that many checks (e.g. all the points being compatible with the given
EC_GROUP, creating a temporary BN_CTX if `ctx == NULL`, check for the
corner case `scalar == NULL && num == 0`) were duplicated again and
again in every single implementation (and actually some
implementations lacked some of the tests).
I thought that it makes way more sense for those checks that are
independent from the actual implementation and should always be done, to
be moved in the EC_POINTs_mul wrapper: so this commit also includes
these changes.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6690)
This commit uses the new ladder scaffold to implement a specialized
ladder step based on differential addition-and-doubling in mixed
Lopez-Dahab projective coordinates, modified to independently blind the
operands.
The arithmetic in `ladder_pre`, `ladder_step` and `ladder_post` is
auto generated with tooling:
- see, e.g., "Guide to ECC" Alg 3.40 for reference about the
`ladder_pre` implementation;
- see https://www.hyperelliptic.org/EFD/g12o/auto-code/shortw/xz/ladder/mladd-2003-s.op3
for the differential addition-and-doubling formulas implemented in
`ladder_step`;
- see, e.g., "Fast Multiplication on Elliptic Curves over GF(2**m)
without Precomputation" (Lopez and Dahab, CHES 1999) Appendix Alg Mxy
for the `ladder_post` implementation to recover the `(x,y)` result in
affine coordinates.
Co-authored-by: Billy Brumley <bbrumley@gmail.com>
Co-authored-by: Sohaib ul Hassan <soh.19.hassan@gmail.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6690)
for specialized Montgomery ladder implementations
PR #6009 and #6070 replaced the default EC point multiplication path for
prime and binary curves with a unified Montgomery ladder implementation
with various timing attack defenses (for the common paths when a secret
scalar is feed to the point multiplication).
The newly introduced default implementation directly used
EC_POINT_add/dbl in the main loop.
The scaffolding introduced by this commit allows EC_METHODs to define a
specialized `ladder_step` function to improve performances by taking
advantage of efficient formulas for differential addition-and-doubling
and different coordinate systems.
- `ladder_pre` is executed before the main loop of the ladder: by
default it copies the input point P into S, and doubles it into R.
Specialized implementations could, e.g., use this hook to transition
to different coordinate systems before copying and doubling;
- `ladder_step` is the core of the Montgomery ladder loop: by default it
computes `S := R+S; R := 2R;`, but specific implementations could,
e.g., implement a more efficient formula for differential
addition-and-doubling;
- `ladder_post` is executed after the Montgomery ladder loop: by default
it's a noop, but specialized implementations could, e.g., use this
hook to transition back from the coordinate system used for optimizing
the differential addition-and-doubling or recover the y coordinate of
the result point.
This commit also renames `ec_mul_consttime` to `ec_scalar_mul_ladder`,
as it better corresponds to what this function does: nothing can be
truly said about the constant-timeness of the overall execution of this
function, given that the underlying operations are not necessarily
constant-time themselves.
What this implementation ensures is that the same fixed sequence of
operations is executed for each scalar multiplication (for a given
EC_GROUP), with no dependency on the value of the input scalar.
Co-authored-by: Sohaib ul Hassan <soh.19.hassan@gmail.com>
Co-authored-by: Billy Brumley <bbrumley@gmail.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6690)
Run `make update ERROR_REBUILD=-rebuild` to remove some stale error
codes for SM2 (which is now using its own submodule for error codes,
i.e., `SM2_*`).
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6690)
Move base 2^64 code to own #if section. It was nested in base 2^51 section,
which arguably might have been tricky to follow.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6699)
Base 2^64 addition/subtraction and final reduction failed to treat
partially reduced values correctly.
Thanks to Wycheproof Project for vectors and Paul Kehrer for report.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6699)
"Computationally constant-time" means that it might still leak
information about input's length, but only in cases when input
is missing complete BN_ULONG limbs. But even then leak is possible
only if attacker can observe memory access pattern with limb
granularity.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5254)
Note that exported functions maintain original behaviour, so that
external callers won't observe difference. While internally we can
now perform Montogomery multiplication on fixed-length vectors, fixed
at modulus size. The new functions, bn_to_mont_fixed_top and
bn_mul_mont_fixed_top, are declared in bn_int.h, because one can use
them even outside bn, e.g. in RSA, DSA, ECDSA...
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/6662)
The new flag marks vectors that were not treated with bn_correct_top,
in other words such vectors are permitted to be zero padded. For now
it's BN_DEBUG-only flag, as initial use case for zero-padded vectors
would be controlled Montgomery multiplication/exponentiation, not
general purpose. For general purpose use another type might be more
appropriate. Advantage of this suggestion is that it's possible to
back-port it...
bn/bn_div.c: fix memory sanitizer problem.
bn/bn_sqr.c: harmonize with BN_mul.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/6662)
Trouble is that addition is postponing expansion till carry is
calculated, and if addition carries, top word can be zero, which
triggers assertion in bn_check_top.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/6662)
Fix the NULL check lack in a different way that is more compatible with
non-NULL branch. Refer #6632
Also mark and pop the error stack instead of clearing all errors when something
goes awry in CONF_get_number.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6643)
The sense of the check for build-time support for most hashes was inverted.
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6673)
Also avoids calling EVP_MD_size() and a missing negative result check.
Issue found by Coverity.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6592)
Check for a negative EVP_MD_size().
Don't dereference group until we've checked if it is NULL.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6592)
Improvement coefficients vary with TLS fragment length and platform, on
most Intel processors maximum improvement is ~50%, while on Ryzen - 80%.
The "secret" is new dedicated ChaCha20_128 code path and vectorized xor
helpers.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6638)
The 128-byte vectors are extensively used in chacha20_poly1305_tls_cipher
and dedicated code path is ~30-50% faster on most platforms.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6626)
The problematic case falls back to a NULL conf which returns the result
of getenv(2). If this returns NULL, everything was good. If this returns
a string an attempt to convert it to a number is made using the function
pointers from conf.
This fix uses the strtol(3) function instead, we don't have the
configuration settings and this behaves as the default would.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6632)
The issue was discovered on the x86/64 when attempting to include
libcrypto inside another shared library. A relocation of type
R_X86_64_PC32 was generated which causes a linker error.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6595)
Occasionally, e.g. when compiling for elderly glibc, you end up passing
-D_GNU_SOURCE on command line, and doing so triggered warning...
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6616)
Inputs not longer than 64 bytes are processed ~10% faster, longer
lengths not divisble by 64, e.g. 255, up to ~20%. Unfortunately it's
impossible to measure with apps/speed.c, -aead benchmarks TLS-like
call sequence, but not exact. It took specially crafted code path...
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6597)
Currently if you encounter application data while waiting for a
close_notify from the peer, and you have called SSL_shutdown() then
you will get a -1 return (fatal error) and SSL_ERROR_SYSCALL from
SSL_get_error(). This isn't accurate (it should be SSL_ERROR_SSL) and
isn't persistent (you can call SSL_shutdown() again and it might then work).
We change this into a proper fatal error that is persistent.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6340)
This allows operation inside a chroot environment without having the
random device present.
A new call, RAND_keep_random_devices_open(), has been introduced that can
be used to control file descriptor use by the random seed sources. Some
seed sources maintain open file descriptors by default, which allows
such sources to operate in a chroot(2) jail without the associated device
nodes being available.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/6432)
Implement support for stateful TLSv1.3 tickets, and use them if
SSL_OP_NO_TICKET is set.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6563)
This happens on systems that perform is* character classifictions as
array lookup, e.g. NetBSD.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6584)
Unlike other ELF systems, HP-UX run-time linker fails to detect symbol
availability through weak declaration.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6583)
Internal submodules of libcrypto may require non-public functions from
the EC submodule.
In preparation to use `ec_group_do_inverse_ord()` (from #6116) inside
the SM2 submodule to apply a SCA mitigation on the modular inversion,
this commit moves the `ec_group_do_inverse_ord()` prototype declaration
from the EC-local `crypto/ec/ec_lcl.h` header to the
`crypto/include/internal/ec_int.h` inter-module private header.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6521)
BN_CTX_end() does not handle NULL input, so we must manually check
before calling from the cleanup handler.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6502)
These headers are internal and never exposed to a cpp compiler, hence no
need for the preamble.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/6554)
Fix prototype warnings triggered by -Wstrict-prototypes when configuring
with `enable-ec_nistp_64_gcc_128`
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/6556)
The goal is to minimize maintenance burden by eliminating somewhat
obscure platform-specific tweaks that are not viewed as critical for
contemporary applications. This affects Camellia and digest
implementations that rely on md32_common.h, MD4, MD5, SHA1, SHA256.
SHA256 is the only one that can be viewed as critical, but given
the assembly coverage, the omission is considered appropriate.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6508)
This extends the recently added ECDSA signature blinding to blind DSA too.
This is based on side channel attacks demonstrated by Keegan Ryan (NCC
Group) for ECDSA which are likely to be able to be applied to DSA.
Normally, as in ECDSA, during signing the signer calculates:
s:= k^-1 * (m + r * priv_key) mod order
In ECDSA, the addition operation above provides a sufficient signal for a
flush+reload attack to derive the private key given sufficient signature
operations.
As a mitigation (based on a suggestion from Keegan) we add blinding to
the operation so that:
s := k^-1 * blind^-1 (blind * m + blind * r * priv_key) mod order
Since this attack is a localhost side channel only no CVE is assigned.
This commit also tweaks the previous ECDSA blinding so that blinding is
only removed at the last possible step.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6522)
This commit implements coordinate blinding, i.e., it randomizes the
representative of an elliptic curve point in its equivalence class, for
prime curves implemented through EC_GFp_simple_method,
EC_GFp_mont_method, and EC_GFp_nist_method.
This commit is derived from the patch
https://marc.info/?l=openssl-dev&m=131194808413635 by Billy Brumley.
Coordinate blinding is a generally useful side-channel countermeasure
and is (mostly) free. The function itself takes a few field
multiplicationss, but is usually only necessary at the beginning of a
scalar multiplication (as implemented in the patch). When used this way,
it makes the values that variables take (i.e., field elements in an
algorithm state) unpredictable.
For instance, this mitigates chosen EC point side-channel attacks for
settings such as ECDH and EC private key decryption, for the
aforementioned curves.
For EC_METHODs using different coordinate representations this commit
does nothing, but the corresponding coordinate blinding function can be
easily added in the future to extend these changes to such curves.
Co-authored-by: Nicola Tuveri <nic.tuv@gmail.com>
Co-authored-by: Billy Brumley <bbrumley@gmail.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6501)
Use EVP_PKEY_set_alias_type to access
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6443)
... to the check OPENSSL_API_COMPAT < 0x10100000L, to correspond with
how it's declared.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6470)
Calling the functions rand_pool_add_{additional,nonce}_data()
in crypto/rand/rand_lib.c with no implementation for djgpp/MSDOS
causees unresolved symbols when linking with djgpp.
Reported and fixed by Gisle Vanem
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6421)
848113a30b added mitigation for a
side-channel attack. This commit extends approach to all code
paths for consistency.
[It also removes redundant white spaces introduced in last commit.]
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6480)
Keegan Ryan (NCC Group) has demonstrated a side channel attack on an
ECDSA signature operation. During signing the signer calculates:
s:= k^-1 * (m + r * priv_key) mod order
The addition operation above provides a sufficient signal for a
flush+reload attack to derive the private key given sufficient signature
operations.
As a mitigation (based on a suggestion from Keegan) we add blinding to
the operation so that:
s := k^-1 * blind^-1 (blind * m + blind * r * priv_key) mod order
Since this attack is a localhost side channel only no CVE is assigned.
Reviewed-by: Rich Salz <rsalz@openssl.org>
CVE-2018-0732
Signed-off-by: Guido Vranken <guidovranken@gmail.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6457)
This module is used only with odd input lengths, i.e. not used in normal
PKI cases, on contemporary processors. The problem was "illuminated" by
fuzzing tests.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6440)
If built with no-dso, syscall_random remains "blind" to getentropy.
Since it's possible to detect symbol availability on ELF-based systems
without involving DSO module, bypass it.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6436)
If built with no-dso, DSO_global_lookup leaves "unsupported" message
in error queue. Since there is a fall-back code, it's unnecessary
distraction.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6436)
Upon a call to CRYPTO_ocb128_setiv, either directly on an OCB_CTX or
indirectly with EVP_CTRL_AEAD_SET_IVLEN, reset the nonce-dependent
variables in the OCB_CTX.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6420)
It's kind of a "brown-bag" bug, as I did recognize the problem and
verified an ad-hoc solution, but failed to follow up with cross-checks
prior filing previous merge request.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6435)
EVP_PKEY_asn1_set_get_priv_key() and EVP_PKEY_asn1_set_get_pub_key()
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6394)
Only applies to algorithms that support it. Both raw private and public
keys can be obtained for X25519, Ed25519, X448, Ed448. Raw private keys
only can be obtained for HMAC, Poly1305 and SipHash
Fixes#6259
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6394)
There were a large number of error codes that were unused (probably a
copy&paste from somewhere else). Since these have never been made public
we should remove then and rebuild the error codes.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6386)
Biggest part, ~7%, of improvement resulted from omitting constants'
table index increment in each round. And minor part from rescheduling
instructions. Apparently POWER9 (and POWER8) manage to dispatch
instructions more efficiently if they are laid down as if they have
no latency...
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6406)
This comes at cost of minor 2.5% regression on G4, which is reasonable
trade-off. [Further improve compliance with ABI requirements.]
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6406)
As it turns out originally published results were skewed by "turbo"
mode. VM apparently remains oblivious to dynamic frequency scaling,
and reports that processor operates at "base" frequency at all times.
While actual frequency gets increased under load.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6406)
OPENSSL_memcmp is a must in GCM decrypt and general-purpose loop takes
quite a portion of execution time for short inputs, more than GHASH for
few-byte inputs according to profiler. Special 16-byte case takes it off
top five list in profiler output.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6312)
On contemporary platforms assembly GHASH processes multiple blocks
faster than one by one. For TLS payloads shorter than 16 bytes, e.g.
alerts, it's possible to reduce hashing operation to single call.
And for block lengths not divisible by 16 - fold two final calls to
one. Improvement is most noticeable with "reptoline", because call to
assembly GHASH is indirect.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6312)
Even though calls can be viewed as styling improvement, they do come
with cost. It's not big cost and shows only on short inputs, but it is
measurable, 2-3% on some platforms.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6312)
Only Linux and FreeBSD provide getrandom(), but they both also provide
getentropy() since the same version and we already tried to call that.
Reviewed-by: Andy Polyakov <appro@openssl.org>
GH: #6405
This will actually support most OSs, and at least adds support for
Solaris and OSX
Fixes: #6403
Reviewed-by: Andy Polyakov <appro@openssl.org>
GH: #6405
Just because an engine implements algorithm methods, that doesn't mean
it also implements the ASN1 method. Therefore, be careful when looking
for an ASN1 method among all engines, don't try to use one that doesn't
exist.
Fixes#6381
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6383)
(cherry picked from commit 1ac3cd6277)
(cherry picked from commit 13b578ada3)
Found by coverity. This is an artifact left over from the original
decaf import which generated the source code for different curves. For
curve 448 this is dead.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6373)
In `aes_wrap_cipher()`, the minimal out buff length is `(inlen - 8)`.
Since it calls `CRYPTO_128_unwrap_pad()` underneath, it makes sense to
reduce the minimal out length in `CRYPTO_128_unwrap_pad()` to align to
its caller.
Signed-off-by: Yihong Wang <yh.wang@ibm.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6266)
The One&Done attack, which is described in a paper to appear in the
USENIX Security'18 conference, uses EM emanations to recover the values
of the bits that are obtained using BN_is_bit_set while constructing
the value of the window in BN_mod_exp_consttime. The EM signal changes
slightly depending on the value of the bit, and since the lookup of a
bit is surrounded by highly regular execution (constant-time Montgomery
multiplications) the attack is able to isolate the (very brief) part of
the signal that changes depending on the bit. Although the change is
slight, the attack recovers it successfully >90% of the time on several
phones and IoT devices (all with ARM processors with clock rates around
1GHz), so after only one RSA decryption more than 90% of the bits in
d_p and d_q are recovered correctly, which enables rapid recovery of
the full RSA key using an algorithm (also described in the paper) that
modifies the branch-and-prune approach for a situation in which the
exponents' bits are recovered with errors, i.e. where we do not know
a priori which bits are correctly recovered.
The mitigation for the attack is relatively simple - all the bits of
the window are obtained at once, along with other bits so that an
entire integer's worth of bits are obtained together using masking and
shifts, without unnecessarily considering each bit in isolation. This
improves performance somewhat (one call to bn_get_bits is faster than
several calls to BN_is_bit_set), so the attacker now gets one signal
snippet per window (rather than one per bit) in which the signal is
affected by all bits in the integer (rather than just the one bit).
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6276)
32-bit vector rotate instruction was defined from beginning, it
not being used from the start must be a brain-slip...
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6363)
OpenSSL 1.1.0 made the X509_LOOKUP_METHOD structure opaque, so
applications that were previously able to define a custom lookup method
are not able to be ported.
This commit adds getters and setters for each of the current fields of
X509_LOOKUP_METHOD, along with getters and setters on several associated
opaque types (such as X509_LOOKUP and X509_OBJECT).
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6152)
Return immediately upon discovery of bad message digest.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6298)
This reverts commit a6f5b11634.
The EVP_PKEY_sign() function is intended for pre-hashed input which is
not supported by our EdDSA implementation.
See the discussion in PR 5880
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6284)
We check that the curve name associated with the point is the same as that
for the curve.
Fixes#6302
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6323)
TlsGetValue clears the last error even on success, so that callers may
distinguish it successfully returning NULL or failing. This error-mangling
behavior interferes with the caller's use of GetLastError. In particular
SSL_get_error queries the error queue to determine whether the caller should
look at the OS's errors. To avoid destroying state, save and restore the
Windows error.
Fixes#6299.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6316)
Per SEC 1, the curve coefficients must be padded up to size. See C.2's
definition of Curve, C.1's definition of FieldElement, and 2.3.5's definition
of how to encode the field elements in http://www.secg.org/sec1-v2.pdf.
This comes up for P-521, where b needs a leading zero.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6314)
Only check the CN against DNS name contraints if the
`X509_CHECK_FLAG_NEVER_CHECK_SUBJECT` flag is not set, and either the
certificate has no DNS subject alternative names or the
`X509_CHECK_FLAG_ALWAYS_CHECK_SUBJECT` flag is set.
Add pertinent documentation, and touch up some stale text about
name checks and DANE.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Don't apply DNS name constraints to the subject CN when there's a
least one DNS-ID subjectAlternativeName.
Don't apply DNS name constraints to subject CN's that are sufficiently
unlike DNS names. Checked name must have at least two labels, with
all labels non-empty, no trailing '.' and all hyphens must be
internal in each label. In addition to the usual LDH characters,
we also allow "_", since some sites use these for hostnames despite
all the standards.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
If the lengths of both names is 0 then don't attempt to do a memcmp.
Issue reported by Simon Friedberger, Robert Merget and Juraj Somorovsky.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/6291)
A previous change of this function introduced a fragility when the
destination happens to be the same as the source. Such alias isn't
recommended, but could still happen, for example in this kind of code:
X509_NAME *subject = X509_get_issuer_name(x);
/* ... some code passes ... */
X509_set_issuer_name(x, subject);
Fixes#4710
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6280)
Using the ca application to sign certificates with EdDSA failed because it
is not possible to set the digest to "null". This adds the capability and
updates the documentation accordingly.
Fixes#6201
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6286)
Experiments have shown that the lookup table used by BN_GF2m_mod_arr
introduces sufficient timing signal to recover the private key for an
attacker with access to cache timing information on the victim's host.
This only affects binary curves (which are less frequently used).
No CVE is considered necessary for this issue.
The fix is to replace the lookup table with an on-the-fly calculation of
the value from the table instead, which can be performed in constant time.
Thanks to Youngjoo Shin for reporting this issue.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6270)
The Console UI method always set echo on after prompting without
echo. However, echo might not have been on originally, so just
restore the original TTY settings.
Fixes#2373
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6156)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6070)
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6070)
* EC_POINT_mul is now responsible for constant time point multiplication
(for single fixed or variable point multiplication, when the scalar is
in the range [0,group_order), so we need to strip the nonce padding
from ECDSA.
* Entry added to CHANGES
* Updated EC_POINT_mul documentation
- Integrate existing EC_POINT_mul and EC_POINTs_mul entries in the
manpage to reflect the shift in constant-time expectations when
performing a single fixed or variable point multiplication;
- Add documentation to ec_method_st to reflect the updated "contract"
between callers and implementations of ec_method_st.mul.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6070)
The function CMS_RecipientInfo_set0_pkey() is a "set0" and therefore
memory management passes to OpenSSL. If the same function is called again
then we should ensure that any previous value that was set is freed first
before we set it again.
Fixes#5052
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6142)
When the input length is zero, just return zero early. Otherwise,
there's a small chance that memory allocation is engaged, fails and
returns -1, which is a bit confusing when nothing should be written.
Fixes#4782#4827
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/6175)
Stop redefining structures that are already defined in system
headers. This also means we can stop setting the pointer size
globally, because the system structures will have the correct pointer
sizes either way. The only exception is passing the right pointer
size to a function.
Stop trying to twist things around with rand(), that's the job of the
DRBG that we feed.
Stop assuming the location of the JPI$_FINALEXC item, look it up
instead.
Signal an exception if the sys$getjpiw call fails (it means the item
list isn't set up right, so works as an assertion, but using VMS
methodology).
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6151)
Calculating BN_mod_inverse where n is 1 (or -1) doesn't make sense. We
should return an error in that case. Instead we were returning a valid
result with value 0.
Fixes#6004
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6119)
No need to buildtest on opensslconf.h
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6149)
Montgomery multiplication post-conditions in some of code paths were
formally non-constant time. Cache access pattern was result-neutral,
but a little bit asymmetric, which might have produced a signal [if
processor reordered load and stores at run-time].
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6141)
which is used for ASN1_STRING_print_ex*() and X509_NAME_print_ex*().
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6105)
rand_pool_bytes_needed() was constructed in such a way that the
smallest acceptable entropy factor was 1 entropy bits per 8 bits of
data. At the same time, we have a DRBG_MINMAX_FACTOR that allows
weaker source, as small as 1 bit of entropy per 128 bits of data.
The conclusion is that rand_pool_bytes_needed() needs to change to
support weaker entropy sources. We therefore change the input of
entropy per byte to be an entropy factor instead. This entropy factor
expresses how many bits of data it takes (on average) to get 1 bit of
entropy.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/6150)
get_last_sys_error() already exists, so there's no need for yet
another macro that fulfills the same purpose.
Fixes#4120
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6088)
That error is already caught by EVP_read_pw_string_min, and causes
this function to return -1, so the code detecting too short passwords
in this function is practically dead.
Fixes#5465
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6080)
Currently, critical bugs prevent using SM2 signatures through the
`EVP_PKEY` interface: any application that managed to satisfy the
requirement of forcing SM3 as the message digest – even if this is
currently not possible transparently through the `EVP_PKEY` interface
and requires manually forcing the MD selection – would crash with a
segmentation fault upon calling the `SM2_sign()` function.
This is easily verified using the OpenSSL CLI to execute this critical
code path under the right conditions:
`openssl dgst -sm3 -hex -sign sm2.eckey /path/to/file/to/sign`
The issue is caused by a double free at the end of `SM2_sign()` in
`crypto/sm2/sm2_sign.c` in case of successful signature generation.
In addition, even if the double free was not causing segfaults,
the function returns the wrong return value in case of success (it
would return 0 rather than 1).
This patch fixes both problems.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6066)
The 'tag2nbyte' lookup table maps the tags of ASN1 string types
to their respective character widths. It is used for example by
ASN1_STRING_to_UTF8(). This commit adds the tag names as comments.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6062)
Co-authored-by: Nicola Tuveri <nic.tuv@gmail.com>
Co-authored-by: Cesar Pereida Garcia <cesar.pereidagarcia@tut.fi>
Co-authored-by: Sohaib ul Hassan <soh.19.hassan@gmail.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6009)
The X509_STORE_CTX_init() docs explicitly allow a NULL parameter for the
X509_STORE. Therefore we shouldn't crash if we subsequently call
X509_verify_cert() and no X509_STORE has been set.
Fixes#2462
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6001)
Branch to global symbol results in reference to PLT, and when compiling
for THUMB-2 - in a R_ARM_THM_JUMP19 relocation. Some linkers don't
support this relocation (ld.gold), while others can end up truncating
the relocation to fit (ld.bfd).
Convert this branch through PLT into a direct branch that the assembler
can resolve locally.
See https://github.com/android-ndk/ndk/issues/337 for background.
The current workaround is to disable poly1305 optimization assembly,
which is not optimal and can be reverted after this patch:
beab607d2b
CLA: trivial
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5949)
Old code replaced in favor of a clearer implementation.
Performances are not penalized.
Updated the copyright end date to 2018.
Reviewed-by: David Benjamin <davidben@google.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5963)
- drbg_lib.c: Silence coverity warning: the comment preceding the
RAND_DRBG_instantiate() call explicitely states that the error
is ignored and explains the reason why.
- drbgtest: Add checks for the return values of RAND_bytes() and
RAND_priv_bytes() to run_multi_thread_test().
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5976)
The ongoing discussion about casting or not in PR #5626 had me compiling
again with above mentioned flags. Indeed the compiler had to say something
about it and I did these changes to silence it again.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5943)
Fixes#5849
In pull request #5503 a fallback was added which adds a random nonce of
security_strength/2 bits if no nonce callback is provided. This change raised
the entropy requirements form 256 to 384 bit, which can cause problems on some
platforms (e.g. VMS, see issue #5849).
The requirements for the nonce are given in section 8.6.7 of NIST SP 800-90Ar1:
A nonce may be required in the construction of a seed during instantiation
in order to provide a security cushion to block certain attacks.
The nonce shall be either:
a) A value with at least (security_strength/2) bits of entropy, or
b) A value that is expected to repeat no more often than a
(security_strength/2)-bit random string would be expected to repeat.
Each nonce shall be unique to the cryptographic module in which instantiation
is performed, but need not be secret. When used, the nonce shall be considered
to be a critical security parameter.
This commit implements a nonce of type b) in order to lower the entropy
requirements during instantiation back to 256 bits.
The formulation "shall be unique to the cryptographic module" above implies
that the nonce needs to be unique among (with high probability) among all
DRBG instances in "space" and "time". We try to achieve this goal by creating a
nonce of the following form
nonce = app-specific-data || high-resolution-utc-timestamp || counter
Where || denotes concatenation. The application specific data can be something
like the process or group id of the application. A utc timestamp is used because
it increases monotonically, provided the system time is synchronized. This approach
may not be perfect yet for a FIPS evaluation, but it should be good enough for the
moment.
This commit also harmonizes the implementation of the get_nonce() and the
get_additional_data() callbacks and moves the platform specific parts from
rand_lib.c into rand_unix.c, rand_win.c, and rand_vms.c.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5920)
Historically we used to implement standalone base64 code for SRP. This
was replaced by commit 3d3f21aa with the standard base64 processing code.
However, the SRP base64 code was designed to be compatible with other SRP
libraries (notably libsrp, but also others) that use a variant of standard
base64. Specifically a different alphabet is used and no padding '='
characters are used. Instead 0 padding is added to the front of the string.
By changing to standard base64 we change the behaviour of the API which may
impact interoperability. It also means that SRP verifier files created prior
to 1.1.1 would not be readable in 1.1.1 and vice versa.
Instead we expand our standard base64 processing with the capability to be
able to read and generate the SRP base64 variant.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5925)
Previously they were using EVP_EncodeBlock/EVP_DecodeBlock. These are low
level functions that do not handle padding characters. This was causing
the SRP code to fail. One side effect of using EVP_EncodeUpdate is that
it inserts newlines which is not what we need in SRP so we add a flag to
avoid that.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5925)
The warning reads "[cast] may cause misaligned access". Even though
this can be application-supplied pointer, misaligned access shouldn't
happen, because structure type is "encoded" into data itself, and
application would customarily pass correctly aligned pointer. But
there is no harm in resolving the warning...
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5894)
Fixes#5778, #5840
The various IS_*() macros did not work correctly for 8-bit ASCII
characters with the high bit set, because the CVT(a) preprocessor
macro and'ed the given ASCII value with 0x7F, effectively folding
the high value range 128-255 over the low value range 0-127.
As a consequence, some of the IS_*() erroneously returned TRUE.
This commit fixes the issue by adding range checks instead of
cutting off high order bits using a mask. In order avoid multiple
evaluation of macro arguments, most of the implementation was moved
from macros into a static function is_keytype().
Thanks to Румен Петров for reporting and analyzing the UTF-8 parsing
issue #5840.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5903)
Adding support for these operations for the EdDSA implementations
makes pkeyutl usable for signing/verifying for these algorithms.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5880)
The wrong "set" field was incremented in the wrong place and would
create a new RDN, not a multi-valued RDN.
RDN inserts would happen after not before.
Prepending an entry to an RDN incorrectly created a new RDN
Anything which built up an X509_NAME could get a messed-up structure,
which would then be "wrong" for anyone using that name.
Thanks to Ingo Schwarze for extensive debugging and the initial
fix (documented in GitHub issue #5870).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/5882)
There are two undocumented DSA parameter generation options available in
the genpkey command line app:
dsa_paramgen_md and dsa_paramgen_q_bits.
These can also be accessed via the EVP API but only by using
EVP_PKEY_CTX_ctrl() or EVP_PKEY_CTX_ctrl_str() directly. There are no
helper macros for these options.
dsa_paramgen_q_bits sets the length of q in bits (default 160 bits).
dsa_paramgen_md sets the digest that is used during the parameter
generation (default SHA1). In particular the output length of the digest
used must be equal to or greater than the number of bits in q because of
this code:
if (!EVP_Digest(seed, qsize, md, NULL, evpmd, NULL))
goto err;
if (!EVP_Digest(buf, qsize, buf2, NULL, evpmd, NULL))
goto err;
for (i = 0; i < qsize; i++)
md[i] ^= buf2[i];
/* step 3 */
md[0] |= 0x80;
md[qsize - 1] |= 0x01;
if (!BN_bin2bn(md, qsize, q))
goto err;
qsize here is the number of bits in q and evpmd is the digest set via
dsa_paramgen_md. md and buf2 are buffers of length SHA256_DIGEST_LENGTH.
buf2 has been filled with qsize bits of random seed data, and md is
uninitialised.
If the output size of evpmd is less than qsize then the line "md[i] ^=
buf2[i]" will be xoring an uninitialised value and the random seed data
together to form the least significant bits of q (and not using the
output of the digest at all for those bits) - which is probably not what
was intended. The same seed is then used as an input to generating p. If
the uninitialised data is actually all zeros (as seems quite likely)
then the least significant bits of q will exactly match the least
significant bits of the seed.
This problem only occurs if you use these undocumented and difficult to
find options and you set the size of q to be greater than the message
digest output size. This is for parameter generation only not key
generation. This scenario is considered highly unlikely and
therefore the security risk of this is considered negligible.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5800)
The GOST engine needs to be loaded before we initialise libssl. Otherwise
the GOST ciphersuites are not enabled. However the SSL conf module must
be loaded before we initialise libcrypto. Otherwise we will fail to read
the SSL config from a config file properly.
Another problem is that an application may make use of both libcrypto and
libssl. If it performs libcrypto stuff first and OPENSSL_init_crypto()
is called and loads a config file it will fail if that config file has
any libssl stuff in it.
This commit separates out the loading of the SSL conf module from the
interpretation of its contents. The loading piece doesn't know anything
about SSL so this can be moved to libcrypto. The interpretation of what it
means remains in libssl. This means we can load the SSL conf data before
libssl is there and interpret it when it later becomes available.
Fixes#5809
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5818)
